|
Product Details:
|
| Item: | Top Loading And Bottom Discharging Bulk Flexitank | Material: | PE+PP |
|---|---|---|---|
| Capacity: | 24000L | Valve: | Ball Valve Or Butterfly Valve |
| Type: | Top Loading And Bottom Discharging | Application: | Non-hazardous Liquid Cargo |
| High Light: | flexi tanks for oi,flexi tank |
||
Top Loading and Bottom Discharging bulk flexitank for non-hazardous liquids transportation
Flexitank is a popular packge for non-hazardous liquids, ADA can offer all the three types flexitanks: Top Loading and Top Discharging, Bottom Loading and Bottom Dicharging, Top Loading and Bottom Discharging.
Nickname: Bulk Flexitank / flexibag/ Container Tank/ Container liner/ bulk liner
Specifications:
| Material | PP & PE |
| Color | White |
| Composition | 3/ 4 inner layers food grade PE flim |
| 1 outer layer PP woven fabric | |
| 3 inch Valve (Ball/ Butterfly vavle) | |
| Capacity | 16,000L-26,000L |
| Loading Temperature | -20ºC-70ºC |
| Packing | Carton&Pallet |
1. Capacity: 18KL-26KL
2. Structure:
Inner multilayer PE + 1 out layer PP
Spc: 4*0.125mm food grade MLDPE Films
PP Layer: 180GSM PP Fabric Woven
Spc: 2*0.125mm + 1*0.25mm food grade MLDPE Films
PP Layer: 180GSM PP Fabric Woven
Spc: 2*0.35mm food grade MLDPE Films
PP Layer: 180GSM PP Fabric Woven
3. Type:
Top loading/discharging
Bottom loading/discharging
Top loading/Bottom discharging
Accessories:
1. Valve
A) Ball valve
B) Butterfly valve
A) Ball valve is sealed more closely and with better resistance to pressure. There is no block when the valve is open, making the liquid flow in and out freely and quickly.
B) In the joint position between internal valve and flexitank, a safety protection device is added, which will prevent inner film layer blocking the valve effectively and make residual liquid the minimum after discharging.
2. Automatic airvent
The special design of airvent could automatically release air pressure inside of the flexitank. It would keep the cargo and flexitank safe during loading and transportation.
3. Fabric woven PP
One time integral molding eliminates longitudinal seams thus reducing the risks of defects or failures. Each 10cm out layer reinforcing rib means enhanced physical strength, durability and safety resulting with improved containment.
Usually, flexitanks can be applied in below areas.
(1) Food and beverage: Bulk wine, edible oil, juice concentrate, soy sauce, honey & syrup.
(2) Industrial oils such as all kinds of lubricants, industrial additives, hydralic oils and so on.
(3) Safe liquid chemicals such as glycol, latex, synthetic resin, cleaning agent, disinfectant, glycol etc.
In general, dangerous liquids and nocuous liquids can't be load in flexitanks.
Contact Person: Joyce
Tel: +8618561712838
